Tenders & Quotations
 
Tender for Supply of Lab Equipments (Mechanical, Chemical and Processing) at Company’s Rubber & Polymers Project site at Dhulagarh, P. S. Sank rail, and Howrah.
Sealed tenders are invited from established and accredited Original Equipment Manufacturer/authorized dealer for supply installation and commissioning of lab equipments at the proposed lab Rubber Park Howrah to be operated by Indian Rubber Manufacturers Research Association (IRMRA).
 
For details please click on Technical Specification for:
Mechanical Lab
Chemical Lab
Processing & Other Equipments
 
The quotations should be sent in two bid system to the following address :
South Asia Rubber & Polymers Park
65, Karnani Estate, 2nd Floor,
209, A. J. C. Bose Road. Kolkata – 700 017.
 
Last date and submission of Tender : 19th September, 2015
Opening of Tender : 21st September, 2015 at 3.00 p.m. at Register office of the company.
 
SARPOL reserves the right to accept / reject / modity and cancel the full tender or part thereof at any time without assigning any reason thereof.
 
 
Tender for Hiring of Agency for Manpower Services
Click here to view full data in PDF format (374KB)
 
Tender for Internal Auditor
Click here to view full data in PDF format (176KB)
 
Tender for Excise Consultant
Click here to view full data in PDF format (143KB)
 
 
For 01 to 11 Tender Contact:
Mr. Yogesh Chavan,
Supply Chain Executive
Mobile No. : +91 9967409343
 
01 Tender for Disposal of Cut Tyre Scrap
Click here to view full data in PDF format (380KB)
 
02 Tender for AMC of Computer, Printer, Server
Click here to view full data in PDF format (363KB)
 
03 Tender for Server & Software
Click here to view full data in PDF format (344KB)
 
04 Tender for Safety Cage for Tyre Endurance Testing Machine
Click here to view full data in PDF format (191KB)
Tender for Safety Cage
Click here to view full data in PDF format (1,209KB)
 
05 Tender for CCTV System
Click here to view full data in PDF format (232KB)
 
06 Tender for Chemical Raw Material
Click here to view full data in PDF format (290KB)
 
07 Tender for Rubber Raw Material
Click here to view full data in PDF format (270KB)
 
08 Tender for Shock Mount
Click here to view full data in PDF format (269KB)
 
09 Tender for Neoprene Rubber Gasket Sheet
Click here to view full data in PDF format (269KB)
 
10 Tender for Neoprene Rubber Diaphragm
Click here to view full data in PDF format (268KB)
 
11 Tender for Ring KPM - 250 M
Click here to view full data in PDF format (254KB)
 
IRMRA invites tenders for testing equipment’s required for proposed Tyre Testing Centre in Chennai
2 / 3 wheeler Tyres, Passenger and Light Truck (LT) Tyre Endurance Test Machine:
Machine application: It is used for load speed performance as well as endurance test of two /three wheeler ,passenger ,Light truck tyres .
 
This machine consists of machine frame ,one pulley wheel ,two hydraulic station,driving motor.
 
Technical Specification:
Loading Position  2
Road Wheel Diameter 1707 mm
Road Wheel diameter accuracy  ± 0.2 mm
Road Wheel Width  450 mm
Road Wheel Runout
(Radial & Lateral ) 
 0.1 mm Max.
Dynamic balanced Q6.3
Max.Speed  350 Kmph
Speed Control  Accuracy  ±0.5 Kmph
Travel distance measurement accuracy  better than 1 %
Operation Temperature 20-50 °C
Temperature Accuracy  ±0.5°C
Time measurement accuracy 1 ms
Loaded tire radius measurement accuracy ± 1 mm
Dynamic circumference measurement accuracy  ± 1 mm
Carriage Travel speed loading Max. 20 mm /s
Tire Diameter Range  300 - 1000 mm
Bead diameter 12"-  24 "
Max.Section width 400 mm 
Load range 0 - 5000 kg
Load instrumentation accuracy 0.02% of FS load
Internal tire pressure 0- 1000 kPa
Pressure instrumentation accuracy  0.1 % of FS
Notes:
Machine must be equipped with data acquisition system & computerized reporting software
Machine should be calibrated after installation as per international standards
Master equipments for the calibration to be provided
Warranty for two years after Installation
Machine should have provision for Slip & Camber angle ± 5°
Machine should have provision for taking tire component (Tread ,both sidewall ,bead area) temp
 
Truck and Bus Tyre Endurance Machine:
Machine application: It is used for load speed performance as well as endurance test of truck/ bus tyres.
 
This machine consists of machine frame ,one pulley wheel ,two hydraulic station,driving motor.
 
Technical Specification:
Parameter  Details
Loading Position  2
Road Wheel Diameter 1707 mm
Road Wheel diameter accuracy  ± 0.2 mm
Road Wheel Width  650 mm
Road Wheel Runout
(Radial & Lateral ) 
 0.1 Max.
Dynamic balanced Q6.3
Max.Speed  250 Km /Hr 
Speed Control  Accuracy  ±0.5 Kmph
Travel distance measurement accuracy  better than 1 %
Operation Temperature 20-50 °C
Temperature Accuracy  ±0.5°C
Time measurement accuracy 1 ms
Loaded tire radius measurement accuracy ± 1 mm
Dynamic circumference measurement accuracy  ± 1 mm
Carriage Travel speed loading Max. 20 mm /s
Tire Diameter Range  400 - 1700 mm
Bead diameter 16" - 30 "
Max.Section width 600 mm 
Load range 0 - 10000 kg
Load instrumentation accuracy 0.02% of FS load
Internal tire pressure 0- 1400 kPa
Pressure instrumentation accuracy  0.1 % of FS
Notes:
Machine must be equipped with data acquisition system & computerized reporting software
Machine should be calibrated after installation as per international standards
Master equipments for the calibration to be provided
Warranty for two years after Installation
Machine should have provision for rolling resistance measurement by torque method with accuracy in line with international standard
Machine should have provision for taking tire component (Tread ,both sidewall ,bead area) temperature
 
Tyre Plunger and Bead Unseat Test Machine:
Machine application: It is used for plunger/bead unseating test of two /three wheeler, passenger ,LT & truck / bus tyres.
 
Technical Specification:
1. Measuring Range  
Tire type Motorcycle tire, Passenger car tire, Truck and bus tire 
Tire Outer Diameter Φ350 ~ Φ1300
Tire Section Width Max. 460 mm
Rim Nominal Diameter 8″ ~ 24″
2. Loading
Loading Method Mechanical servo loading
Thrust force of loading spindle Max.50 kN
Loading force range 0.5 kN ~ 48 kN
Max travel distance of main loading spindle 1000 mm  (Including up & down directions)
Loading speed 50 ± 1mm/min (Must be programmable )
Fast return speed of main loading spindle 500 mm/min (Must be programmable)
3. Bead unseating test
Test load 20 kN
Working travel distance 200 mm
Loading speed 50 ± 1 mm/min (Must be programmable )
4. Machine accuracy
Displacement accuracy ±0.1%F.S.
Load accuracy ±0.1%F.S. 
5. Plunger size
Spherical plunger diameter 8 mm, 19 mm, 32 mm, 38 mm
6. Bead unseating block
Block type Standard block as per BIS or DOT standard.
7. Temperature 20-40°C 
Accuracy  ± 0.1 °C
8. Pressure  0-1000 kPa 
Accuracy  ±0.1%F.S.
Notes:
Machine must be equipped with data acquisition system & computerized reporting software
Machine should be calibrated after installation as per international standards
Master equipments for the calibration to be provided
Warranty for two years after Installation
 
 
IRMRA invites sealed quotation for instruments and equipments
Invitation of Tender - :
TENDER NUMBER : IRMRA/TESTING/12-13/Nov/01/Rev 01
 
IRMRA invites sealed quotation for the following instruments / equipments :
1. BET surface area Analyser : Multipoint / single point with all standard accessories, latest window based software.
2. Hose bursting machine : Upto 25000 PSI
3. Salt spray tester : As per ASTM B 117
4. Tensile testing machine with environmental chamber, -70 to 150 deg C
5. Vacuum oven :
6. GCMS with pyrolyser, headspace analyzer, and auto sampler with all accessories and standard libraries.
 
Up gradation and repairing
1. Particle size apparatus
2. Star tensile testing machine
3. Humidity chamber : Up gradation completed
 
Following are the some more requirements for testing section
1. Low temperature bath for Temperature Range Ambient to - 70 deg C, with TR test and Torsion Test Jig ACCUMALATING Facility.
2. Environmental test room / conditioning room, Seleant testing room at new site, inner 10 X 10 X 7 ( W X L X H), Room will be constructed with removable PUF panel of GI sheet plastic sheet coated from both side. With refrigeration system, Air circulating system, Humidification and De-humidification and heating system, spilt type Refrigeration system
3. Environmental chamber for Instron tensile testing machine, , -70 to 150 deg C
4. Online low temperature hardness testing facility , -70 to RT deg C
 
Please send your sealed Technical Bid with detailed specification and Commercial Bid separately on or before 17-11-2012 which is extended upto 7th Jan 2013.
 
Please specify tender number and Sl. No. of instrument for which quotation is sent on the cover of sealed quotation.
 
All quotations should be addressed  to :  
The Director

Indian Rubber Manufacturers Research Association (IRMRA)
Plot No : 254/1B, Road No. 16 V
Wagle Industrial Estate
Thane [west] – 400 604, Maharashtra.
 
 
Tender for Condom Testing Facilities
Click here to view full data in PDF format (33 KB)
 
Tender for Dispose of Scrap Tyres / Tubes
Click here to view full data in PDF format (78 KB)
 
Tender for Interior works of dining hall for IRMRA HRD facilities
Click here to view full data in PDF format (4.39 MB)
 
To view the PDF document you require Adobe Acrobat Reader. To download the reader click here.
 
 
 
200 ton Press New Model
New Press
Desma Type Press With strip seals & Glide ring, No Chevron packing & Gland.

All the Mounting Platen guiding PB guides bushes Mainting Parallelisms  & Surface Grinding.

Heater power is 4000watts in Platen Cylindrical Tie bar ground & Hot chromium  platter for moving platen guide Top & Bottom Bolsters are solid plate.

PID control with SSR for maintaining  +/- 1* in Temp. PLC for control Auto Cycle ie breathing / Curing & Mould open.
 
200 Ton one Day Light & two Cylinder Desma Type Lab Press 
Bore Dia : 210mm with 320 Bar working Pressure
Stroke : 400mm
Day Light : 600mm
Plate Size : 1350 x 600 x 50
Power HP   : 10HP
Speed : 30mm / Sec.
Pressing Speed : 1.3mm / Sec.
Return Speed : By Cavity
Lubrication : By Hand Oil
Operation : a) Inch Mode
      b)  Single Cycle Mode
Heater : Round Rod Heater
Temp. : Max. 210  Spare Temp Controller with Timer
PLC : Logo PLC Siemens Make for auto cycle
Pump Make : LP-Yuken, HP- polyhedron
Valve Size & Make : 06- Yuken / polyhedron with pcm block
Oil Tank Size : 200 Lts. max
 
Terms & conditions for bidding :
Tender should be submitted separately for technical bid and commercial bid separately
The tenders to be submitted in a sealed envelop clearly indicating on the cover
“Sealed Tender for supply of Hydraulic Press” – Due on 3.00 p.m. on 15-12-2011
Commercial bid must include Price of the item, VAT, Excise, Packaging / forwarding cost without any ambiguity
 
Last date for submitting quotation 15.00hrs 15th December 2011
 
All quotations should be addressed  to :  
Dr. P. Thavamani
Director

Indian Rubber Manufacturers Research Association (IRMRA)
Plot No : 254/1B, Road No. 16 V
Wagle Industrial Estate
Thane West
Maharshtra - 400604
 
 
 
Tyre Uniformity Testing Machine for Two & Three wheeler / Passenger car/ Light Truck Tyres
 
This machine basically consists of the following components :
Machine frame
Road wheel
Tire loading position with tractive motor unit
Tire loading unit with electric servo screw drive
3 components measurement unit to measure tire non uniformity in tractive ,lateral , &radial direction
Rim unit with special design which enable the direct mounting of the tire at the loading station
 
Technical details are as under :
Sr. No. Parameters
1 Forces (Accuracy ± 1 N)
1.1 Radial Force : Max. 2000 N
1.2 Tangential force : Max 2000 N
1.3 Lateral Force : Max. 2000 N
1.3 a Additional provisions :
1.3 b Lateral Force offset
1.3 c Plysteer
1.3 d Coincity
1.3 e Tractive force
2 Geometry
2.1 Tyre radial runout
2.2 Tyre lateral runout
3 Test Drum
3.1 Diameter : 854 mm
3.2 Radial Runout : 0.05 mm
3.3 Residual unbalance :
3.4 Static : < 5 kg.mm
3.5 Dynamic < 500 kg.sq.mm
3.6 Width : 400 mm
3.7 Tyre sizes : 12 " to 22"
3.8 Max.load of tyre : 20,000 N
3.9 Max. tyre pressure : 6 bar
3.10 Tyre OD : 1100 mm Max.
4 Accessories
4.1 Tyre uniformity marking unit
4.2 Test rims ranging from 12" to 22"
4.3 Auto lubrication unit prior to measuring stage
 
Note : Machine should confirm ISO 13326 : 1998 (E) requirements
 
Please send us your technical / commercial bids separately addressed to, The Director, IRMRA within 15 days.
 
All quotations should be addressed  to :  
Dr. P. Thavamani
Director

Indian Rubber Manufacturers Research Association (IRMRA)
Plot No : 254/1B, Road No. 16 V
Wagle Industrial Estate
Thane West
Maharshtra - 400604
 
   
 
  Home | About IRMRA | Services | Membership | News & Events | Photo Gallery | Library | FAQ’s | e-Learning | NAIP Projects | Careers | Contact Us
  Copyrights : Indian Rubber Manufacturers Research Association, 2010